HD-26

 

HD–26 x 90

Precision Gap Bed Engine Lathe with 4” Spindle Bore

 

Capacity Swing Over Bed

26”

  Swing Over Cross Slide

17 ½”

  Swing in Gap

35 1/8”

  Gap Width in Front of the Face plate

10 5/8”

  Distance Between Centers

90”

  Width of Bed

15 ¾”

  Height of Center from Leg Bottom

44 5/16”

Headstock Spindle Bore

4 1/16”

  Taper of Spindle Bore & Center

M.T. #7 x #5

  Type of Spindle Nose

D1-11

  Number of Spindle Speed

12

  Spindle Speed

13-1200 RPM

Gear Box Number of Feed Changes

16

  Range of Feeds per Revolution

0.0024” – 0.039”

  Longitudinal Cross

1/3 of longitudinal feed

  Leadscrew diameter & threads per inch

1 ¾” , 2 TPI

  Range of inch threads

1-36 (44)

  Range of metric pitches

0.2-14 (39)

Tool Slide Maximum Travel of Compound

9-17/32”

  Maximum Travel of Cross Slide

15 ¾”

Tailstock Tailstock Quill Travel

7”

  Tailstock Quill Diameter

2 15/16”

  Taper in Tailstock Quill

M.T. #5

Motor Main Drive Motor

15 HP

  Coolant Pump Motor

1/8 HP

Weight 90”

6300

 

 

 

 

 

 

STANDARD EQUIPMENT & ACCESSORIES

  • Main Motor: 10 HP/ 15 HP (22”/26” swing),
  • Ground Steel Center MT#5 for Headstock
  • 12” Back Plate
  • Cross Slide Screw: 8 / 5 TPI (22’ / 26” swing)
  • Full Length Splash Guard
  • Lead Screw: 4TPI / 2 TPI (22” / 26” swing)
  • Halogen Work Light
  • Thread Chasing Dial
  • Tool Box w/ necessary Wrenches & Spanners
  • 4-way Tool Post fitted to T-slotted compound
  • Instruction Manual & Parts List
  • 10” Steady Rest with roller jaws
  • Hardened & Ground Bed & Cross Slide Ways
  • 4 1/6” Spindle Bore
  • Automatic Longitudibal Feed Stop Bar
  • Spindle Nose: D1-8 / D1-11 Camlock (22”/26”)
  • Two-Speed Drive Tailstock Spindle (MT#5)
  • 12 Spindle Speeds (13 – 1200 RPM)
  • Coolant System with Pump & Piping
  • Headstock Spindle Center Adapter: MT#7 x #5
  • Pull Drawer Chip (Oil) Pan
  • Ground Steel Center MT#5 for Headstock
  • Longitudinal Rapid Traverse Standard on 90”,120”, & 160” C.C. Lathes

 

 

 

 

Optional Accessories

        • 10” Steady rest with roller jaws (min. capacity 1.6”)
        • 15” Steady rest with roller jaws (min. capacity 7.5”)
        • Taper Turning Attachment
        • Longitudinal Rapid Traverse
        • Digital Read Out Newall
        • 20” 4 jaw
        • 16” 3 Jaw